Products
DW-RC12

Has 12 outputs for connecting loads and 24 inputs for connecting various sensors/buttons.

Read more
DW-HT05

5 universal outputs support: Lights NC/NO heating valves Blinds 1 or 2-pole gates 1 or 2-pole valves NC/NO locks Fan coil units 12 Discreet inputs that support: Buttons Switches Reed switches Leak sensors Motion detectors

Read more
DW-HT07

Has 7 outputs for connecting loads and 12 inputs for connecting various sensors/buttons.

Read more
LCP10

Wall-mounted control panel

Read more
FE-IC

Video intercom calling panel. Has a built-in 1.3MP camera with IR illumination, a proximity card reader, a relay for connecting the electric lock. Has a built-in 2Gb memory to record photos/video. Supports SIP protocols, DLNA.

Read more
FE-IC.NFC

Video intercom calling panel. It has a built-in NFC reader, a 1MP camera with IR illumination and a relay for connecting the electric lock. It also has a built-in 6Gb memory for taking photos or recording videos. Supports SIP and DLNA protocols.

Read more
FE-MP

Multiroom system media point with a built-in amplifier. Used to play music, the Internet radio, system notifications. Supports DLNA protocol. Can be used either within the Smart Home system or separately

Read more
CW-MLI / CW-M

This module contains motion, lighting (CW-MLI only) sensors and an IR transmitter (CW-MLI only).

Read more
WW-HTL

Contains temperature, lighting, and humidity sensors.

Read more
WW-TS

Wall temperature sensor for DW-HCxx module

Read more
FW-TS

Open-frame temperature sensor.

Read more
FW-FT

This is an underfloor heating temperature sensor, it can also be used to measure the outdoor temperature.

Read more
EW-WL

Water leakage sensor with an alarm light, mountable in the floor surface. Used together with DW-WL or BW-LSA modules.

Read more
FW-WL

The sensor is placed on the floor surface. It has an alarm light, which changes from green to red if the sensor detects water on the floor.

Read more
CW-HTMLI-II/CW-CO2

This module contains motion, lighting, humidity, temperature, CO2 sensors and an IR transmitter.

Read more
CW-M-II / CW-M-II (BLACK) / CW-MLI-II

This module contains motion sensor, lighting sensor, and an IR transmitter.

Read more
CW-MSD

Motion sensor which can be connected to the Metaforsa series modules.

Read more
BW-AC

This module is designed for integration Mitsubishi AC (connector CN105, CN92), Daikin AC (connector S21) to the Smart Home system.

Read more
BW-NA

This module is an adapter for connecting NEST thermostat to the Smart Home system.

Read more
BW-IO

The module is designed for connection of other digital devices which do not have standard interfaces

Read more
BW-010

This module allows connecting devices with 0-10V input interface to the Smart Home system. Home system.

Read more
BW-UART

This module is designed for interface adjustment between the devices which have the UART interface (TTL levels) and the Smart Home system.

Read more
BW-RS232

This module is designed for interface adjustment between the devices which have the RS232 interface and the Smart Home system.

Read more
BW-RS485

This module is designed for interface adjustment between the devices which have the RS485 interface and the Smart Home system. The module has an internal 120Ω terminator resistor.

Read more
BW-LSA

Allows connecting two leakage sensors, has the function of detecting the presence of the sensor.

Read more
BW-SW06

This module is used to connect buttons/reed switches.

Read more
BW-SW24V

All outputs have an internal 1KΩ resistor therefore, the brightness of the LEDs will be slighty diminished when each next LED will be switched on

Read more
BW-RGB

This module allows controlling RGB strip or three monochrome LED strips.

Read more
BW-DM

This single-channel dimmer is designed for smooth control of electrical load (non reactive load). It has 3 input channels for connecting buttons and reed switches. MOSFET type.

Read more
BW-LC02

Compact size (only 16mm thickness) 6 inputs support: Buttons Switches reed switches LED buttons Digital temperature sensor Outputs support: Lights NC/NO heating valves NC/NO locks

Read more
DW-METERS

This module is designed for interface adjustment between the AC which have the UART interface (TTL levels) and the Smart Home system.

Read more
DW-010

This module allows connecting devices with 0-10V input interface to the Smart Home system.

Read more
DW-UART

This module is designed for interface adjustment between the devices which have the UART interface (TTL levels) and the Smart Home system.

Read more
DW-RS232

This module is designed for interface adjustment between the devices which have the RS232 interface and the Smart Home system.

Read more
DW-RS485

This module is designed for interface adjustment between the devices which have the RS485 interface and the Smart Home system. This module has an internal 120Ω terminator resistor.

Read more
DW-DALI

This module allows controlling DALI devices from the Smart Home system.

Read more
DW-SW16

This module can support up to 15 buttons/reed switches or 8 LED buttons.

Read more
DW-RGB03

The module allows connecting RGB and monochrome LED strips.

Read more
DW-BC03

This module provides control of curtains, projector screens, valves or other electrical motors with force control.

Read more
DW-WL02

The module supports the connection of 2 valves of water supply shutoff and 4 leakage sensors.

Read more
DW-HC10

The device is designed for controlling heating devices (radiators, floor heating, fan coil units, etc.). The device is equipped with 10 inputchannels for connection of temperature sensors.

Read more
DW-DM02

This module is designed for smooth adjustment of brightness of lighting devices (non reactive load). The dimmer type is MOSFET with trailing edge dimming. Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform…

Read more
DW-DM04

This module is designed for smooth adjustment of brightness of lighting devices (non reactive load). The dimmer type is MOSFET with trailing edge dimming. Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform…

Read more
DW-DM06

This module is designed for smooth adjustment of brightness of lighting devices (non reactive load). The dimmer type is MOSFET with trailing edge dimming. Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform…

Read more
DW-LC07

This module is designed for high power AC/DC circuits commutation. Used for light, power sockets and other electrical devices. This universal unit is able to control lights, various types of valves, blinds, gates, locks and fan coil units, etc. The relay is a low-noise one and features special high-performance contacts rated for 120A 20ms inrush…

Read more
DW-LC10

This module is designed for high power AC/DC circuits commutation. Applicable for light, power sockets, for control of fan coil units, locks, blinds/gates. This universal unit is able to control lights, various types of valves, blinds, gates, locks and fan coil units, etc. The relay is a low-noise one and features special high-performance contacts rated…

Read more
DW-LC18

This module is designed for high power AC/DC circuits commutation. Applicable for light, power sockets, for control of fan coil units, locks, blinds/gates. This universal unit is able to control lights, various types of valves, blinds, gates, locks and fan coil units, etc. The relay is a low-noise one and features special high-performance contacts rated…

Read more
METAFORSA2.CLOUD

METAFORSA SMART HOUSE is a ready-made solution for automation of residential and commercial premises, hotel complexes which includes the most highly desired features of Smart House. The device has 10 control channels, 4 dimming channels, 24 incoming sensor channels, and a digital sensors’ connection port. Metaforsa can be controlled via cloud with a securely encrypted…

Read more
METAFORSA2

METAFORSA SMART HOUSE is a ready-made solution for automation of residential and commercial premises, hotel complexes which includes the most highly desired features of Smart House. The device has 10 control channels, 4 dimming channels, 24 incoming sensor channels, and a digital sensors’ connection port. Metaforsa can be controlled via cloud with a securely encrypted…

Read more