LED-AMP is a simple amplifier that works on the principle of input=output. It is designed for use with LED strips or other LED light devices.

This module allows interpretation of controlling signals from IO connections for 12/24V LED/RGB strips.

This is a sensor that works with our BT-CAN bluetooth module. The sensor shows the temperature and humidity.

This module is used to connect to remote devices via Bluetooth.

METAFORSA SMART HOUSE est une solution clé en main pour l’automatisation des espaces résidentiels et commerciaux, des complexes hôteliers, comprenant les fonctionnalités les plus recherchées d’une maison intelligente. L’appareil dispose de 10 canaux de contrôle, 4 canaux de gradation et une quantité de 28 canaux d’entrée. Metaforsa peut être contrôlé via le cloud avec un…

This single-channel dimmer is designed for smooth control of the electrical load (non-reactive load). It has 3 input channels for connecting push buttons and reed switches. MOSFET type.

This module can control RGB strips or three monochrome LED strips.

All outputs have an internal resistance of 1KΩ so the brightness of the LEDs will be slightly decreased when each subsequent LED is switched on.

Permite conectar dos sensores de fugas, tiene la función de detectar la presencia del sensor.

METAFORSA SMART HOUSE é uma solução pronta para a automação de instalações residenciais e comerciais, complexos hoteleiros que inclui as características mais desejadas da Smart House. O dispositivo tem 10 canais de controlo, 4 canais de regulação da intensidade da luz, 24 canais de sensores de entrada e uma porta de ligação para sensores digitais….

Has 12 outputs for connecting loads and 24 inputs for connecting various sensors/buttons.

5 universal outputs support: Lights NC/NO heating valves Blinds 1 or 2-pole gates 1 or 2-pole valves NC/NO locks Fan coil units 12 Discreet inputs that support: Buttons Switches Reed switches Leak sensors Motion detectors

Has 7 outputs for connecting loads and 12 inputs for connecting various sensors/buttons.

Wall-mounted control panel

Video intercom calling panel. Has a built-in 1.3MP camera with IR illumination, a proximity card reader, a relay for connecting the electric lock. Has a built-in 2Gb memory to record photos/video. Supports SIP protocols, DLNA.

Video intercom calling panel. It has a built-in NFC reader, a 1MP camera with IR illumination and a relay for connecting the electric lock. It also has a built-in 6Gb memory for taking photos or recording videos. Supports SIP and DLNA protocols.

Multiroom system media point with a built-in amplifier. Used to play music, the Internet radio, system notifications. Supports DLNA protocol. Can be used either within the Smart Home system or separately

This module contains motion, lighting (CW-MLI only) sensors and an IR transmitter (CW-MLI only).

Contains temperature, lighting, and humidity sensors.

Wall temperature sensor for DW-HCxx module

Open-frame temperature sensor.

This is an underfloor heating temperature sensor, it can also be used to measure the outdoor temperature.

Water leakage sensor with an alarm light, mountable in the floor surface. Used together with DW-WL or BW-LSA modules.

The sensor is placed on the floor surface. It has an alarm light, which changes from green to red if the sensor detects water on the floor.

This module contains motion, lighting, humidity, temperature, CO2 sensors and an IR transmitter.

This module contains motion sensor, lighting sensor, and an IR transmitter.

Motion sensor which can be connected to the Metaforsa series modules.

This module is designed for integration Mitsubishi AC (connector CN105, CN92), Daikin AC (connector S21) to the Smart Home system.

This module is an adapter for connecting NEST thermostat to the Smart Home system.

The module is designed for connection of other digital devices which do not have standard interfaces

This module allows connecting devices with 0-10V input interface to the Smart Home system. Home system.

This module is designed for interface adjustment between the devices which have the UART interface (TTL levels) and the Smart Home system.

This module is designed for interface adjustment between the devices which have the RS232 interface and the Smart Home system.

This module is designed for interface adjustment between the devices which have the RS485 interface and the Smart Home system. The module has an internal 120Ω terminator resistor.

Allows connecting two leakage sensors, has the function of detecting the presence of the sensor.

This module is used to connect buttons/reed switches.

All outputs have an internal 1KΩ resistor therefore, the brightness of the LEDs will be slighty diminished when each next LED will be switched on

This module allows controlling RGB strip or three monochrome LED strips.

This single-channel dimmer is designed for smooth control of electrical load (non reactive load). It has 3 input channels for connecting buttons and reed switches. MOSFET type.

Compact size (only 16mm thickness) 6 inputs support: Buttons Switches reed switches LED buttons Digital temperature sensor Outputs support: Lights NC/NO heating valves NC/NO locks

This module is designed for interface adjustment between the AC which have the UART interface (TTL levels) and the Smart Home system.

This module allows connecting devices with 0-10V input interface to the Smart Home system.

This module is designed for interface adjustment between the devices which have the UART interface (TTL levels) and the Smart Home system.

This module is designed for interface adjustment between the devices which have the RS232 interface and the Smart Home system.

This module is designed for interface adjustment between the devices which have the RS485 interface and the Smart Home system. This module has an internal 120Ω terminator resistor.

This module allows controlling DALI devices from the Smart Home system.

This module can support up to 15 buttons/reed switches or 8 LED buttons.

The module allows connecting RGB and monochrome LED strips.

This module can support up to 14 buttons/reed switches/LED buttons/leak sensors/motion sensors/temperature sensors/led strips/rgb strips/WS2812B strips.